Buy Nirve Spring Action Threaded Cruiser Bike Fork (Black, 1 1/8-Inch Threaded)Nirve Spring Action Threaded Cruiser Bike Fork (Black, 1 1/8-Inch Threaded) Product Description:
- Nirve ''Spring-Action'' Cruiser Fork
- 1 1/8'' diameter steerer, 180mm steerer length with 60mm threaded section
- Fender mount hole at bottom of steerer
- Accommodates standard 26 X 2.125'' cruiser wheels
- For use on bikes equipped with threaded headsets
Product Description
Nirve Spring-Action Cruiser Fork is 1.1/8-Inch diameter steerer. It has a 180 milli meter steerer length with 60 milli meter threaded section. It has a fender mount hole at the bottom of the steerer. It accommodates standard 26 X 2.125-Inch cruiser wheels. For use on bikes equipped with threaded headsets.
Customer Reviews
Most helpful customer reviews
1 of 1 people found the following review helpful.
By Doug
I am extremely happy with this springer fork. It was installed on a Nirve B-1 and it really smooths out the ride. It also gives the B-1 a little more style. The entire fork is black except for the spring, which is what I was hoping for.One thing to note, the bearing race on the bottom of the steerer tube is not included. I had to take the race off my original Nirve fork by carefully tapping it with a punch and small hammer. If you don't have another fork to rob from then it may be a problem. I'm also not sure if the race is the same size on other brands of bikes.Install was straight forward, but no instructions are included. Make sure you put the drop out portion of the fork on the wheel first, then the smaller arms go outside followed by a washer / nut. I also ended up putting one keyed washer over the top portion of the springer before locking down the nut on the steerer tube.
0 of 0 people found the following review helpful.
By Mariano
Great quality product well packed, only problem was the 1 1/8 headset, that is hard to get here in Costa Rica,kind of old i was told, and i will need to do some modifications to the frame since it didnt fit. i havent tried it yet, i'll post another comment once i finished with installation process , time frame unkonwn!! BTW it was all black no chrome parts as shown on the picture that's why i give 4 out of 5.
0 of 0 people found the following review helpful.
By N. Eury
I have a tall cruiser bike that my existing fork is a 1 1/8" neck stem diameter with a length of 8" from the lower bearing race seat to the top of the threaded neck stem........These forks seem to be listed at 7" long. Can I get a longer neck stem version of this fork?
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
