Shop Fox W1746 Fine Air Filter Product Description:
- Filter size 13-1/4-Inch by 14-1/4-Inch by 1-1/4-Inch
- Automatic timed shut off
- Fan speed 3 (100, 140 and 200 CFM)
- Standard filtration: 0.3 microns
- Fan off delay - 4 settings
Product Description
This is one machine that will sit in the shop and gather dust. Fine dust that is. With its three speed fan, automatic shut-off and 0.3 micron filter, this Fine Air Filter circulates shop air and captures the finest dust that otherwise stays suspended. Even with an efficient dust collector, if other machines are making dust, you need the Fine Air Filter. It is recommended that you leave this on during and for a few hours after finishing up in your workshop. You will be amazed at how much fine dust it picks up! Motor: 120V, 60Hz; filter size: 13 1/4" x 14 1/4" x 1 1/4"; standard filtration: 0.3 microns; fan sound rating: 42 dB; fan speeds: 3 (100, 140 & 200 CFM); automatic timed shut-off; fan off delay: 4 settings; approximate shipping weight: 18 lbs.
Customer Reviews
Most helpful customer reviews
9 of 9 people found the following review helpful.
Not a bad addititon
By Dusty
I usually use this either during fine sanding, or using the time-delay feature to leave it running after I leave the shop. Either way it does reduce the amount of "fines" left around the shopI've had it a year, and with saw-dust, it appears all I need to do is blow the filter out. If I was getting gritty/greasy/oily fines in it I suspect I would have to change filters
6 of 6 people found the following review helpful.
Shop Fox air cleaning review
By eddie
Shop Fox W1746 Fine Air FilterThis Shop Fox air filter has been a great addition to my shop. I always use a Delta 1.5 HP dust collector when I am turning wood on my lathe. I keep a 4" flex tube right over the work piece being worked to collect as much dust and debris as possible immediately. While the Delta is strong and uses 3 micron bags there is still dust that gets into the air. I wanted additional protection for the fine stuff and looked for a stationary air cleaner. Most are expensive and the filters are pricey also. I decided to try the Shop Fox W1746. It's not as powerful as some of the bigger units but has shown to be effective. It has 3 speeds and is very quiet. I can pull the front off and see the dust in the filter that would normally be in the air around me.For the price I would say this has been a good purchase. In addition the filters are a decent price and quick to install.It is easy to move around and I can position it wherever I want. It is programmable for later shutdown.This is helping make my shop air cleaner ( and lungs )and I would recommend this product not only for shop but for house also. Since it's so quiet you can put it in the living room
5 of 6 people found the following review helpful.
superior product
By a;lkjfd
Purchased the Shop Fox W1746 three years ago and love the thing. Used it for fine sanding dust. Great performance. We now bring it into our living room to reduce dust in our living area. Again, it clears the air in a few minutes. I change the filters twice a year. We are getting one for my son as a Christmas gift.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!