Flowmaster 942548 Super 44 Series 2.50" Offset In and Out 16-Gauge Aluminized Steel Opposite Side Offset Muffler Product Description:
- Deep aggressive exhaust note
- Noticeable Interior resonance
- Recent two chamber improvement
- Race proven patented delta flow technology
- No Internal packIng to blowOut
Product Description
Flowmaster Super 44 muffler uses the same delta flow technology found In our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest soundIng, highest performIng four Inch case street muffler Flowmaster has ever built. Constructed of 16 gauge alumInized steel and fully MIG welded for maximum durability.
Customer Reviews
Most helpful customer reviews
2 of 2 people found the following review helpful.
By Paul
Searching for a muffler for my 2007 F150 brought me to this little gem. I was wanting something with a little bit of a growl, without going all out straight pipe. The description says "aggressive sound", and that is how I would describe this muffler once mounted on my vehicle. It is just loud enough, maybe tipping a little to the too much side even, but not over kill. That being said, I was a little disappointed that it came with no mounting hardware at all. No clamps or hangers, just 4 or 5 Flowmaster stickers. I still gave it 5 stars, because it never said in the description that it came with any hardware. My own neglect led to this disappointment, so I could not in good conscience leave a star off this quality products' review. Especially considering that 2 clamps set me back a whole $4 from my local auto parts store. Great product, great sound, solid purchase.
1 of 1 people found the following review helpful.
By Annabelle Ortiz
It has taken me awhile to getting around to installing this myself on my 97 ford expedition 5.4L and after the install and the first start up you could instantly hear the difference! Sounds like the truck was meant to sound like this, and it feels like the truck got a fresh start. From 0 to 2000 rpm it sonds just like a super 44 should sound but at highway speeds it is barely noticeable.If anyone is getting this for the same truck I recommend you rent a sawzall to help any DIY'er if your clamping it on and loctite for the clamp bolts. Honestly it took a good amount of cutting the exhaust tubing even after dropping the OE muffler but do it in 2inch steps. I ended up right before the Y intersection of exhaust coming from motor and had to do with out a heat shield. To make final cut to level muffler you will have to remove another heat shield just to make a good cut and replace it before final install.I used a 2.5 inch single flared pipe from exhaust to inlet on muffler then just dumped exhaust from outlet on muffler using a 45 degree 2.5 inch single flared pipe. This results in a very strong sounding muffler. I did away with the original remaining exhaust pipe leading over rear axle and angled out to side since it couldn't be used.I know this sounds kind of hacked but it turned out great. If you are into the whole FLOWMASTER sound and have been wondering how agressive the super 44 is you will not be dissapointed!
1 of 1 people found the following review helpful.
By Jonathan M.
I put two of these on my 2012 R/T Dodge Charger and they sound great!! Along with having the rear resonators out. I would recommend these Flowmasters for a car owner. If you have a truck you should go for super 40's
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!